Tagged Posts

Super 8 Footage taken by Bill Hammond in 1973 Ponca City, Oklahoma

Footage was projected onto a wall via Super 8, and recorded with an iPhone 11. I will work to transfer/archive this footage in better quality in the future.

<p>This video was taken, I believe in June, 1973 by my father, Bill Hammond.</p>

<p>Footage was projected onto a wall via Super 8, and recorded with an iPhone 11. I will work to transfer/archive this footage in better quality in the future.</p>

Project350z Garage WorkSo what did you do this weekend? Did you spend two days under your car? I basically did, well more like 1 day, but it was broken up over an afternoon/evening and then the following morning after I ran to get a new “nut” that I needed to finish things up.

Why was I under the 350z? Well, removing the fun parts of course. I planned to remove the front and rear Hotchkis sway bars, along with the TrueChoice Phase 4 Konis (front) and the off the shelf Koni Sports (rear) along with springs/perches. Though in order to deal with the rear sway bar I also ended up pulling the Injen Super SES exhaust system off the car as well and put the OEM exhaust back on.

Read the whole blog post for the time lapse video

A week ago I posted a “question” on Facebook to see what color we should wrap the 350z in.

Well it looks like the final tally is 31/13/13

31 for Matte Black
13 for Matte Green
13 for Don't Do It!

So Matte Black it will be! Time to order the vinyl! I would hope to have it done by the end of the month, but realizing we are moving before then, we’ll set a goal of the end of June to have this completed. Of course we’ll have a time lapse video of the process!

So the car is naked, well about as naked as it can be.

Saturday evening I took it to the car wash and removed all of the vinyl. I plan to put it back on, but it’ll be a while before that happens. I figured it was a little too much right now to attract attention. I’d post photos, but there really isn’t much point, right now the car is just a blue 350z that is a little lower than normal.

In honor of the occasion here’s some President’s of the United States of America, with Naked and Famous

Today was a practice day at the San Diego National Tour. This morning I took part in the Evolution School advantage program, basically you get a ton of seat time in the morning before the practice course opens up for the rest of the entrants for the National Tour. My r-comps were on a truck otw to the tour, so I ran my street tires for the morning session. I also had the car set at full soft (bump/rebound), most definitely not the configuration needed, and my evo instructor Brian let me know.

He knew me (not to be cocky, a lot of autocrossers do because of my involvement with SCCAForums.com and announcing at events throughout the years), but he made the mistake of assuming I knew what I was doing Open-mouthed smile. He assumed I knew about suspension setup, I corrected him, and asked for help! He was very helpful and provided me some guidance to try things out.

In the morning sessions on street tires (Azenis 615s, decent tires) I got down to 30.0*, not bad, but nothing near the 27.* that a SS Z06 was running.

I also had a horrendous knocking coming front the front end of the car, though that wasn’t new, it was happening all week. When I put the new bushings in I failed to apply any grease to them (other than when they went into the control arms).  My father is here in town to watch me run at the tour, so we headed over to autozone to get some white lithium spray grease to try to help with the knocking. I thought, there was no way that it would help, but geez, it’s amazing how much quieter the car is now.

When the tires showed up I got them put on and adjusted the Konis a bit, then went back out and ran a few more practice runs to see how the car felt.

I got faster on each run, finishing with a 28.555. Still not up to snuff against that Z06, but definitely better than I had been doing in the morning.

I ended up going with the following settings on the Konis

Front Double Adjustable Truechoice Coilovers
Rebound:
1 full turn from soft (2.5 turns is full stiff)
Bump: 6 clicks (12 or 13 clicks is full stiff)

Rear Koni Sports (single adjustable)
Rebound:
2.5 clicks (10 clicks available)

I’m still trying to get the time lapse video from drive down to San Diego yesterday together. I can’t get Windows Live Movie Maker working very well on my laptop. I’m hoping it finishes up here soon.

The night before an autocross, and I’m stoked for tomorrow, even if it rains (as forecasted). I got a replacement GoPro HD camera today in the mail.

For those of you who don’t know, I had a problem with my GoPro camera, which I use a LOT! I use it for autocross videos, and time lapse videos of working on the car. A few weeks ago I was working on the car doing a standard time lapse, but the camera freaked out. I came to find out that there was a bug in the camera software that would show up with time lapse mode after 10k (I think) photos were taken. It was a known bug though, and there was a firmware update for the camera to fix the bug.

So I applied the firmware update, but something during the process failed and the camera ended up “bricking” which basically means it wouldn’t work. You couldn’t power it on, you couldn’t use it, nothing, it was as useful as a brick. Since I got the camera for xmas it was still under warranty so I contacted GoPro about getting it fixed, while it took a bit of back and forth via email with their customer service reps, they provided me with an RMA number to send it in.

This was a couple of weeks ago, right before a 2 day autocross and right before we were heading out of town for vacation, so I didn’t get the camera mailed out until Tuesday of this week. On Thursday I got an email from them saying that they had a replacement camera ready to mail out, but I hadn’t included a return address. I replied with our address, and then on Friday I got an email saying it would go out. It is nice that we live about 15 miles from their headquarters because the camera showed up today via USPS.

I’m not positive that the firmware fix has been applied to this camera yet, but I’m going to leave it as is for now. I want to use it at the autocross tomorrow, so I don’t want to run the risk of bricking it again!

How was today?

COLD AND WET!

Hard to see but there is snow on them thar hills #autocrossBeyond that? Very cold and very wet. I went to Great America today for the SFRSCCA Divisional Autocross. I got there around 7am and put the Kumho tires on the car, big mistake! I was sort of drying out, the sky was almost clear, but the drive down there was rainy, and there was snow! You can’t see it very well in this picture, but yes, there was snow in the “hills” around the Bay Area.

So I installed the wheels/tires and walked the course a few times. The driver’s meeting got delayed, then the start of the event got delayed. Then the rain started back up Sad smile

Let me tell you this, Kumho V710s don’t work well when it is <40 degrees and raining. My first run I went out and it felt horrible, I turned a 66.*, I wasn’t too thrilled about that. Here’s a video of that run.

Flash Not Installed

But I was too lazy to go get my street tires (freshly mounted the previous night mind you). Big mistake, I went out on my second run and decided I would take things slower, expecting to actually go around the course faster. I slowed down and ran a 69.*. That broke this camel’s back, I ran off to get my street wheels, drill, and jack so that I could swap to the Falken Azenis RT-615s.

Thankfully Grant (in a Nismo 370z) followed me over and helped me bring 2 of the tires back to my grid spot. I don’t think I would have gotten them changed in time had he not helped! Thanks for the help Grant!

The Falkens were MUCH better, not perfect, but way better than the V710s in the rain. I managed to run a 60.*, a big improvement over the first two runs, though I just wish I had put them on before my second run, or even to begin with!

Here’s a video of the third run

Flash Not Installed

So what’s gone on so far in 2011? Let’s recap on this 33rd day of the year.

So far I’ve kept up with my blogging commitment, every day, You can find a list of all the blogs at http://www.chrishammond.com/

I’ve managed to post 33 photos of myself for #Flickr365 and 33 photos of Jacqueline for #Baby365. The baby is growing! She’s up to 13lbs 13oz last time she was weighed and in the 95th percentile for height at her age, a jump from her last measurement.

I’ve managed to autocross the 350z once already this year, and have at least 2 more events coming up this month, with a possible 4th as well.

The Super Bowl is coming this weekend, I’m ready for it, we’re going to finally get up to Fairfield and see some friends we haven’t seen in probably 8 months!

If you followed the blog post earlier this week you already know that Injen came through and got me the replacement midpipes for my Super SES Exhaust which I removed late last year.

Today I took the OEM exhaust off the 350z and put the Injen exhaust back on. The job itself is easy, probably could do it all in about 25 minutes if I really pushed it, but I didn’t. I took my time, cleaned up in the garage a bit, cleaned up the exhaust a bit as well. I also managed to weigh both the Injen exhaust and the OEM exhaust to see what the difference was. I was hoping it would be more!

Read the full blog post for photos and video!

Yes, it's true folks, the Project240z lives again! Check out the latest incarnation!

PHOTO REMOVED

So what if it is in a web based video game.

So this weekend’s goal was to get the Garage packed up and ready for the move. I didn’t get much done in there yesterday, mainly just a few things assembled on the 240Z (http://www.project240z.com) today however was a whole different story. I spent 9 hours in the garage, packing, cleaning, assembling, and throwing things out. I managed to get the car running, and even drove it around the circle (check out the 240Z site later for the video).

I packed up the things in the garage that I could get into a box or container. There are a few more things to pack up, but mainly it comes down to getting the boxes out of the garage and onto the trailer next weekend. I have quite a bit of stuff to throw away or scrap. A load of metal I don’t think I want to move, so I’ll try to find a scrap yard this week where I can go and maybe even get some $$$ out of the deal?

With the success last night I decided I had to work on the car this evening a bit. The first thing I did was get it up on all four jack stands so that they were under the frame and not under control arms of the car. This would allow me to begin working on the suspension pieces.

When I got the car from Jeff, uhhh over three years ago now, it came with a second suspension that had been pulled off another car. This other suspension has springs (yellow), new(er) struts, a larger front sway bar, and also the addition of a rear sway bar. It also is a lot cleaner then the current suspension. So tonight I started pulling off the front suspension, starting with the sway bar, and moving on to removing the rest, at least what I could, of the right front.

I got stuck at the tie rod, but I did manage to get most of the other bolts removed. I came to a conclusion though, I’m going to likely just drop the whole front suspension out, including the cross member as the second suspension has one as well. In order to do that though I am going to have to dismount the motor. I will attempt to do that by lifting the motor up off the mounts with the cherry picker, hopefully without having to disconnect the transmission and not removing the whole thing from the car.

Before I do that though I will likely fully disassemble the other suspension and take it to a friend’s house to sandblast everything. I’m heading to Tampa for a conference tomorrow, so that will have to wait until the evenings next week. I’ll try to get everything disassembled during the week, both front and rear suspensions, and then probably go down to his place Saturday if he’ll be around.

I spent the morning with Dave and Terec helping to finish buttoning up items on the 240Z so we could attempt to start it today. We were successful in getting to the point of attempting to start it, though we weren't successful in actually getting it started, there's an issue or two that I need to track down. Likely issues with timing and firing for the Megasquirt. Because the last time I had the car running was back in August 2007 I've now got a new laptop and don't have it configured for the Megasquirt. I'm hoping to get it setup tonight and try to hook it up tomorrow to see what I find.

Here's the video from today's work.

Flash Not Installed

So my weekend of working on the 240Z started off quite slowly today. I ended up sleeping until almost noon this morning, it was nice to catch up on some much lost rest from the travelling the past few months.

So after my restful morning I had a few errands to run to get my costume ready for a party tonight. Once those were completed I was able to spend some time in the garage. First things first getting the months of piled on crap off the top of the car. That led me to assembling the 2nd craftsman stool that I had purchased probably 10 months ago now, it was in a box on the hood of the car.

Once I could see the top of the car I made room at the back and rolled her back a bit in the garage, this allowed me to get to the motor which has been on the stand for quite some time sitting in front of the car. Without the Corvette in the garage (*sheds a small tear*) I had plenty of room to move the motor over to the free side of the garage to work on. The next step for the car is to get all of the motor bits back together, the manifolds, turbo and all other accessories need to be put on the car so that I can put it back in the engine bay. I spent some time this afternoon cleaning off some more of the grease/dirt that covers the motor. I think Lynn, the previous owner, took it to a rally cross based on all the dirt and grime I’ve pulled off this motor over time.

I didn’t get too far today, but I hope that tomorrow I can get all of the parts back on the motor, if I can successfully do that I should be able to get the motor back in the car next weekend. The biggest problem I have working on the car is staying focused, if I’m by myself I tend to stray from the task at hand, and I never seem to get anything done. Case in point today, at some point while working on clearing off the car I got out the angle grinder and wire wheeled the hole where the FM antenna was at one point, I thought it looked like it might be rusting so I took the paint off then sprayed some primer on the car. Now it looks worse than before, but I had fun! :)

More updates tomorrow, hopefully with some video. I tried using the Chase Cam today to shoot some video but apparently the PDR doesn’t really care for normal AA batteries as it only stayed powered on for about 5 minutes before shutting off, without me knowing.

3 of 5 drivers in the CorvetteZ06.org team finished in 3rd this weekend. Natalie finished third in SSL, Dave finished Third in ASP, and I finished third in SS. Beth finished 2nd in SSL and managed to win the only tire this weekend, Tom ended up having to deal with some family business in KC after taking his runs on Saturday so he was unable to run on Sunday. Hopefully his father-in-law is doing better. More detailed updates and video later this weekend/week.
I spent the day today cleaning up the Corvette and then setup the new look of the car for the upcoming Solo Nationals. A big thanks to Dave at www.SoloPerformance.com for getting the vinyl cut yesterday. It took me pretty much all afternoon to get this done, with washing the car, clay barring a few parts of the car, polish and wax, applying the vinyl then another wash. I think the car turned out great, you can check out the flickr photos to see what it looks like. Now for the video, music from Steve Ewing (www.steveewingmusic.com) Check out the video on the full blog post.
Yesterday I spent an hour or so working on the motor in the garage. I only got one thing finished, and hopefully it is finished and doesn't need to come off again, I got the cover and gasket installed on the head. After that I got the oil cooler connections on the side of the block and then spent some time cleaning up other items on the blog. It's amazing how much crap is on that block, I wish I had a pressure washer to clean it off. Video on the full post
RSS URL

Chris Hammond

Chris Hammond

is a father, husband, leader, developer, photographer and car guy. Chris has long specialized in ASP.NET and DotNetNuke (DNN) development, so you will find a variety of posts relating to those topics. For more information check out the about Chris Hammond page.

If you are looking for DotNetNuke consulting please visit Christoc.com Software Solutions

Find me on Twitter, GitHub and LinkedIn.